Axcess Network Receiver Installation Guide Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Příslušenství komunikace Axcess Network Receiver Installation Guide. Axcess Network Receiver Installation Guide User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk

Shrnutí obsahu

Strany 1 - Network Receiver

Network Receiver Installation Manual

Strany 2 - Notices

Network Receiver 10 750.001.005 R04 © 2005 AXCESS Inc. Overview The Network Receiver incorporates a small operating system that provides a UnixT

Strany 3 - U.S. Patents

© 2002, AXCESS Inc. 750.001.005 R0000 11 Functions & Features The Network Receiver has the following functions: • Decode the signal receive

Strany 4

Network Receiver 12 750.001.005 R04 © 2005 AXCESS Inc. Configuring the Network Receiver The Network Receiver receives the Tag’s broadcast signal

Strany 5 - Table of Contents

© 2002, AXCESS Inc. 750.001.005 R0000 13 2. Plug the AC adapter into the jack labeled 5VDC on the back of the Receiver (see note on page 11). 3.

Strany 6

Network Receiver 14 750.001.005 R04 © 2005 AXCESS Inc. Figure 4 Select a Com port 5. Enter the following information in the Com Properties d

Strany 7 - Information Flags

© 2002, AXCESS Inc. 750.001.005 R0000 15 Setting Up a Wiegand System Responding to Activator IDs By default, the Receiver will only output Wiegan

Strany 8

Network Receiver 16 750.001.005 R04 © 2005 AXCESS Inc. Serial Output Format The default format for Tag data sent out the serial port of the Rece

Strany 9

© 2002, AXCESS Inc. 750.001.005 R0000 17 Responding to Activator IDs The Receiver will only output Tag data via the serial port if it contains a

Strany 10 - Specifications

Network Receiver 18 750.001.005 R04 © 2005 AXCESS Inc. Setting the Receiver ID Receiver IDs are used by ActiveTrac software to determine from w

Strany 11 - Functions & Features

© 2002, AXCESS Inc. 750.001.005 R0000 19 Viewing Configuration Settings To view the current configuration settings of the Receiver, type: 38c An

Strany 12 - Connecting Power

Network Receiver 2 750.001.005 R04 © 2005 AXCESS Inc. Notices Information provided in this manual is a result of the design and development of AXC

Strany 13 - Connecting to a Computer

Network Receiver 20 750.001.005 R04 © 2005 AXCESS Inc. 5. TTL output 1 on valid read, when enabled any read from a tag will cause TTL 1 to be

Strany 14

© 2002, AXCESS Inc. 750.001.005 R0000 21 Assigning an IP Address It is imperative that prior to installing the equipment you obtain the IP Addres

Strany 15 - Setting Up a Wiegand System

Network Receiver 22 750.001.005 R04 © 2005 AXCESS Inc. Connecting to a Network via Crossover Cable Connecting to the Network via Crossover cable

Strany 16

© 2002, AXCESS Inc. 750.001.005 R0000 23 Figure 7 Enter the IP address and subnet mask 5. Click OK and follow the prompts. NOTE It may be ne

Strany 17

Network Receiver 24 750.001.005 R04 © 2005 AXCESS Inc. 8. At the DOS window, type telnet 192.168.1.200 9. Login using the Username “admin”, an

Strany 18 - Setting the Receiver ID

© 2002, AXCESS Inc. 750.001.005 R0000 25 11. Since all Network Receivers are shipped with the default Username of “admin”, and a Password of “we

Strany 19 - 04 Serial Activators

Network Receiver 26 750.001.005 R04 © 2005 AXCESS Inc. IMPORTANT! Note all previous settings as it will be necessary to reset your PC after the

Strany 20

© 2002, AXCESS Inc. 750.001.005 R0000 27 Connecting to the Network via Serial Cable To connect via serial cable 1. Connect the female end of a

Strany 21 - Assigning an IP Address

Network Receiver 28 750.001.005 R04 © 2005 AXCESS Inc. Figure 14 Select the com port to which the receiver is connected 8. Enter the followi

Strany 22

© 2002, AXCESS Inc. 750.001.005 R0000 29 Diagnostic Mode Diagnostic Mode allows you to troubleshoot the ActiveTag system by displaying all data r

Strany 23 - Network Receiver Front Panel

Network Receiver © 2002, AXCESS Inc. 750.001.005 R0000 3 Customer Service AXCESS Inc. toll-free support line is 1-800-577-6080. U.S. Patents 4,81

Strany 24

Network Receiver 30 750.001.005 R04 © 2005 AXCESS Inc. Network Receiver Installation Once the Network Receiver has been configured with the foll

Strany 25

© 2002, AXCESS Inc. 750.001.005 R0000 31 Data One Wire (white)Data Zero Wire (green)from Wiegandcontrol panelGround Wire (black)9VDC+5VGD1D0GND 2

Strany 26 - IP Receiver

Network Receiver 32 750.001.005 R04 © 2005 AXCESS Inc. Connecting to a Serial Device The Network Receiver is a DCE (Data Circuit-terminating Eq

Strany 27

© 2002, AXCESS Inc. 750.001.005 R0000 33 Serial Output The Receiver outputs serial data in ASCII 8-bit decimal format (each ASCII character is re

Strany 28

Network Receiver 34 750.001.005 R04 © 2005 AXCESS Inc. To RelayJ9 Figure 16 Plugging in the relay wires 5. Close the case, reaffix the nut an

Strany 29 - 0 0 1 1 0 6 0 2 4 0 1 2 3 4

© 2002, AXCESS Inc. 750.001.005 R0000 35 Mounting the Network Receiver • The Receiver should be within 35 feet of an activated Tag • The recei

Strany 30

Network Receiver 36 750.001.005 R04 © 2005 AXCESS Inc. AXCESS Inc. provides a ground plane bracket for such applications (Figure 20). Drip LoopG

Strany 31 - Ground Wire (black)

© 2002, AXCESS Inc. 750.001.005 R0000 37 Appendix A: Coaxial Cable The number one problem encountered during installation is wiring technique and

Strany 32 - GND 24VDC

Network Receiver 38 750.001.005 R04 © 2005 AXCESS Inc. SleeveInsulatorInspection HoleCrimp AreaContact PinPlug BodyAssemblyCoaxial CableBraid11

Strany 33

Network Receiver © 2002, AXCESS Inc. 750.001.005 R0000 39 Appendix B: Advanced Wiegand Configuration Data Buffering Setting the Time between Out

Strany 35 - Mount with

Network Receiver 40 750.001.005 R04 © 2005 AXCESS Inc. Appendix C: Network Receiver Commands NOTE All bolded commands are default settings &

Strany 36 - Ground Plane Bracket

Network Receiver © 2002, AXCESS Inc. 750.001.005 R0000 41 Format of Receiver Commands All commands issued to the Network Reader are preceded by a

Strany 37 - Appendix A: Coaxial Cable

Network Receiver 42 750.001.005 R04 © 2005 AXCESS Inc. Command Description 23c Set serial data rate to 4800 baud 24c Set serial data

Strany 38 - 11/3211/32 3/16

Network Receiver © 2002, AXCESS Inc. 750.001.005 R0000 43 Configure/Display Valid ID List Command Description <number>+ Add new Device

Strany 39 - Data Buffering

Network Receiver 44 750.001.005 R04 © 2005 AXCESS Inc. The following set of response codes are output by the Network Receiver to acknowledge re

Strany 40

Network Receiver © 2002, AXCESS Inc. 750.001.005 R0000 45 Appendix D: Network Receiver IP Configuration Instructions Introduction The Network Rece

Strany 41

Network Receiver 46 750.001.005 R04 © 2005 AXCESS Inc. Checking Memory Status There are commands that provide a means of monitoring memory sta

Strany 42

Network Receiver © 2002, AXCESS Inc. 750.001.005 R0000 47 TINI Firmware TINI Firmware 1.02, Preview Release 3 i. Introduction I. System

Strany 43 - Receiver Command Responses

Network Receiver 48 750.001.005 R04 © 2005 AXCESS Inc. ## initializeNetwork ######## #Add other user additions here: If you wa

Strany 44

Network Receiver © 2002, AXCESS Inc. 750.001.005 R0000 49 Note: These variables will not take effect until the server is restarted. A user can

Strany 45 - Instructions

Network Receiver © 2002, AXCESS Inc. 750.001.005 R0000 5 Table of Contents GENERAL INSTALLATION INFORMATION ...

Strany 46

Network Receiver 50 750.001.005 R04 © 2005 AXCESS Inc. In addition to redirecting output to a file, you can redirect output to null (e.g. java

Strany 47 - !. System Files

Network Receiver © 2002, AXCESS Inc. 750.001.005 R0000 51 Usage: chown USER FILE  Clears t

Strany 48 - III. Telenet Server

Network Receiver 52 750.001.005 R04 © 2005 AXCESS Inc. echo This command echos back a line of text to a stream. Syste

Strany 49 - V. Commands

Network Receiver © 2002, AXCESS Inc. 750.001.005 R0000 53 To set the hostname only to, type: hostname tini1 

Strany 50

Network Receiver 54 750.001.005 R04 © 2005 AXCESS Inc. The new process that is launched will inherit its parent's System properties. You

Strany 51

Network Receiver © 2002, AXCESS Inc. 750.001.005 R0000 55 [-l] Show all file attributes Alias: dir Example: Th

Strany 52

Network Receiver 56 750.001.005 R04 © 2005 AXCESS Inc. Displays the current working directory. Usage: pwd 

Strany 53

Network Receiver © 2002, AXCESS Inc. 750.001.005 R0000 57 Usage: source FILE Displays the current system

Strany 54

Network Receiver 58 750.001.005 R04 © 2005 AXCESS Inc. [-n username] Name of the new user [-p password] Pas

Strany 55

Network Receiver © 2002, AXCESS Inc. 750.001.005 R0000 59 As long as the number reported is less than 65281, your slush build is under the maximum

Strany 56

Network Receiver 6 750.001.005 R04 © 2005 AXCESS Inc. APPENDIX B: ADVANCED WIEGAND CONFIGURATION...

Strany 57

Network Receiver 60 750.001.005 R04 © 2005 AXCESS Inc. Text Movement : :[range] move [addr] (move lines in range to addr) :[range] d (delet

Strany 58

Network Receiver © 2002, AXCESS Inc. 750.001.005 R0000 61 Problem: Some Slush commands would throw an ArrayIndexOutOfBounds exception when incorre

Strany 59

Network Receiver 62 750.001.005 R04 © 2005 AXCESS Inc. Description: Optional PPP slush command does not reflect changes to PPP API. Solution:

Strany 60 - VI. Changes

Network Receiver © 2002, AXCESS Inc. 750.001.005 R0000 63 Index Activator IDs, Default, 17 Antenna, Mounting Separately, 34 Cable, 36 Code 254,

Strany 61

Network Receiver © 2002, AXCESS Inc. 750.001.005 R0000 7 General Installation Information Safety Personal safety is of first importance in the p

Strany 62

Network Receiver 8 750.001.005 R04 © 2005 AXCESS Inc. Hand Tools, Equipment and Materials The following are required and recommended hand tools

Strany 63

© 2002, AXCESS Inc. 750.001.005 R0000 9 Required for Serial Output • A straight-through (one to one) RS-232 cable of sufficient length to connec

Komentáře k této Příručce

Žádné komentáře